Preview

Proceedings of the National Academy of Sciences of Belarus. Agrarian Series

Advanced search

Studying the processing of leguminous components into easily digestible feed for calves

https://doi.org/10.29235/1817-7204-2019-57-1-85-92

Abstract

The basic feed for calves during pre-weaning period is whole milk. In order to reduce consumption of whole milk in the leading Western countries, whole milk replacers are used. Attempts to produce local whole milk replacers have not yet found wide distribution due to the high consumption of dry milk and lack of production of hydrogenated fat with addi­tives of vitamins and microelements in Belarus. In recent years, production process of local milk replacers has been started to develop. An innovative technology has been developed for production of whole milk replacers based on local grains, legumes and oil crops, taking the idea of processing them into easily digestible liquid feeds based on moisture-and-heat treatment of grain components using cavitation energy. A special hydrodynamic plant was designed, allowing to obtain a homogeneous mass right of the grain forage, which does not decompose into fractions, highly palatable and easily digested by animals. The allowable processing temperature of leguminous crops was determined to be 80 °C maximum. In order to reduce processing time of the water-and-grain mixture and increase process productivity, a hypothesis was put forward related to use of elec­tromagnetic field for heating the mixture moving in pipeline. Studies have confirmed the efficiency of the electromagnetic field. Moisture-and-heat treatment of grain forage by cavitation using induction heating allows, in a short period of time and at a low temperature, to get easily digestible feed and preserve essential amino acids and vitamins. The developed innovative technology and equipment allows to reduce consumption of whole milk by 15-20% when growing calves during pre-weaning period.

About the Authors

V. I. Perednya
The Research and Practical Center of the National Academy of Sciences of Belarus for Mechanization of Agriculture.
Belarus

Perednya Vladimir I. - D. Sc. (Engineering), Professor. 

1 Knorina Str., Minsk 220049.



V. I. Khrutsky
The Research and Practical Center of the National Academy of Sciences of Belarus for Mechanization of Agriculture.
Belarus

Khrutsky Vladimir I.

1 Knorina Str., Minsk 220049.



A. A. Romanovich
The Belarusian State Agrarian Technical University.
Russian Federation

Romanovich Anastasia A. - Ph. D. (Engineering), Asso­ciate Professor.

99 Nezavisimosti Ave., Minsk 220023.



A. V. Kitun
The Belarusian State Agrarian Technical University.
Belarus

Kitun Anton Vladimirovich - D. Sc. (Engineering), Profes­sor.

99 Nezavisimosti Ave., Minsk 220023.



References

1. Sheiko I. P. Prospects for the development of dairy cattle breeding in the Republic of Belarus. Novye napravleniya razvitiya tekhnologii i tekhnicheskikh sredstv v molochnom zhivotnovodstve: materialy XIII Mezhdunarodnogo simpoziu- ma po voprosam mashinnogo doeniya sel’skokhozyaistvennykh zhivotnykh, Gomel’, 27-29 iyunya 2006 g. [New directions in the development of technologies and technical means in dairy cattle breeding: materials of the XIII International symposium on the issues of machine milking of farm animals, Gomel, June 27-29, 2006]. Minsk, 2006, pp. 13-17 (in Russian).

2. Golushko V. M., Goryachev I .I., Perednya V. I., Pilyuk S. N. Whole milk substitutes from local sources of nutri¬ents. Zootekhnicheskaya nauka Belarusi: sbornik nauchnykh rudov= Zootechnic Science of Belarus: a collection of scientific papers. Zhodino, 2006, vol. 41, pp. 159-164 (in Russian).

3. Kormanovskii L. P. Scientific substantiation of the development and application of automated precision technologies in animal husbandry. Sbornik nauchnykh trudov Vserossiiskogo nauchno-issledovatel’skogo instituta mekhanizatsii zhivot- novodstva [Collection of scientific works of the All-Russian Research Institute of Mechanization of Animal Husbandry]. Podol’sk, 2006, vol. 16, pt. 2, pp. 3-9 (in Russian).

4. Perednya V. I., Sharshunov V. A., Kitun A. V. Technologies and equipment for cows milking and primary milk treat¬ment. Minsk, MisantaPubl., 2016. 975 p. (in Russian).

5. Lazarev Yu., Kuzmin I. Easily digestible carbohydrates in cows feeding. Kormlenie sel’skokhozyaistvennykh zhivot- nykh i kormoproizvodstvo = Feeding of agricultural animals and feed production, 2006, no. 10, pp. 41-42 (in Russian).

6. Sharshunov V. A., Rukshan L. V., Ponomarenko Yu. A., Chervyakov A. V. Technology and equipmentforfodder pro-duction. Part 2. Technological equipment for feed mills. Minsk, MisantaPubl., 2014. 815 p. (in Russian).

7. Gavrilenko S. A., Kozlov S. I.Optimization of the expansion of feed grain of rye on the expander with an adjustable pre-matrix chamber and electric heating of a screw body. Nauchnyi poisk molodezhi XXI veka: materialy VIII Mezhdunarodnoi nauchnoi konferentsii studentov i magistrantov, Gorki 23-25 oktyabrya 2006 g. [Scientific search of the youth of the XXI century: materials of the VIII International scientific conference of students and master’s students, Gorki, October 23-25, 2006]. Gorki, 2006, pt. 1, pp. 218-220 (in Russian).

8. Azarenko V. V., Goryachev I. I., Perednya V. I. Preparing tecnology of the whole milk substitute from grain com¬ponents. Vestsi Natsyyanal’nai akademii navuk Belarusi. Seryya agrarnykh navuk = Proceedings of the National Academy of Sciences of Belarus. Agrarian series, 2008, no. 2, pp. 96-100 (in Russian).

9. Smorodov E. A., Galiakhmetov R. N., Il’gamov M. A. Physics and chemistry of cavitation. Moscow, Nauka Publ., 2008. 226 p. (in Russian).

10. Romanovich A. A. Reduction of energy intensity of hydrodynamic treatment of canned feed grain with the dispensed distribution in feed mixture. Abstract of doctoral thesis in engineering. Minsk, 2014. 22 p. (in Russian).

11. Bakach M., Bashko Yu., Perednya V., Kuvshinov A., Romanovich A. Study of grain forage processing into highly digestible fodder. Problemy intensifikatsii zhivotnovodstva s uchetom okhrany okruzhayushchei sredy i proizvodstva al ’ter- nativnykh istochnikov energii, v tom chisel biogaza : XXIIMezhdunarodnaya nauchnaya konferentsiya, Falenty, 20-21 sen- tyabrya 2016 g. [Problems of livestock intensification taking into account environmental protection and production of alter¬native energy sources, including biogas: XXII International Scientific Conference, Falenta, September 20-21, 2016]. Warsaw, 2016, pp. 15-19 (in Russian).

12. Nemkov V. S., Demidovich V. B. Theory and calculation of the induction heating device. Leningrad, Energoizdat Publ., Leningradskoeotdelenie,1988. 279 p. (in Russian).

13. Britsyn N. L., Fogel’ A. A. (ed.). Heating in the electric field of high frequency. 3nd ed. Moscow, Leningrad, Mashinostroenie Publ., 94 p. (in Russian).

14. Lozinskii M. G. Surface hardening and induction heating of steel. Moscow, MashgizPubl., 1949. 460 p. (in Russian).

15. Nemkov V. S., Demidovich V. B. Theory and calculation of induction heating devices. Leningrad, Energoato- mizdat Publ., Leningradskoeotdelenie,1988. 280 p. (in Russian).

16. Slukhotskii A. E., Ryskin S. E. Inductors for induction heating. Leningrad, EnergiyaPubl., Leningradskoeotdelenie, 1974. 264 p. (in Russian).

17. Neiman L. R. Surface effect in ferromagnetic bodies. Moscow, Leningrad, Gosenergoizdat Publ., 1949. 190 p. (in Russian).

18. Kuvaldin A. B. Induction heating of ferromagnetic steel. Moscow, Energoatomizdat Publ., 1988. 198 p. (in Russian).

19. Perednya V. I., Romanovich A. A. Highly digestible fodder for calves feeding. Problemy intensifikatsii zhivotnovodst¬va s uchetom okhrany okruzhayushchei sredy i proizvodstva al’ternativnykh istochnikov energii, v tom chsle biogaza: XXIII Mezhdunarodnaya nauchnaya konferentsiya, Falenty, 19-20 sentyabrya 2017 g. [Problems of livestock intensification taking into account environmental protection and production of alternative energy sources, including biogas: XXIII International scientific conference, Falenta, September 19-20, 2017]. Warsaw, 2017, pp. 141-146 (in Russian).


Review

Views: 638


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1817-7204 (Print)
ISSN 1817-7239 (Online)