Calculation of mechanical and electromechanical characteristics of asynchronous motors with a short-circuit rotor with variable parameters of its equivalent circuit
https://doi.org/10.29235/1817-7204-2022-60-4-406-417
Abstract
When calculating the mechanical and electromechanical characteristics of asynchronous motors (AM), as a rule, their T-shaped equivalent circuits (EC) are used. Parameters of these circuits, determined from reference literature or catalogs, are constant values and correspond to the working part of the characteristics in terms of the rated speed or motor slip. Calculations of the mechanical and electromechanical characteristics of the AM at constant values of the parameters of the EC of AM in a wide range of their speed or slips lead to significant errors outside the operating part of the characteristics. The paper presents a methodology and algorithm for calculating mechanical and electromechanical characteristics of АМ with a short-circuit rotor at variable parameters of their equivalent circuit, as well as checking the coincidence of the results of calculating the characteristics according to the proposed algorithm with the calculation results obtained by another wellknown method.
About the Author
M. A. Pryshchepau
Belarusian State Agrarian Technical University
Belarus
Belarus
Mikhail A. Pryshchepau – D. Sc. (Engineering), Associate Professor, Professor of the Department of Electrical Equipment of Agricultural Enterprises
99, Nezavisimosti Ave., 220023, Minsk
References
1. Firago B. I., Pavlyachik L. B. Adjustable AC drives. Minsk, Tekhnoperspektiva Publ., 2006. 363 p. (in Russian).
2. Moshchinskii Yu. A., Bespalov V. Ya., Kiryakin A. A. Determination of the parameters of the equivalent circuit of an asynchronous machine using catalog data. Elektrichestvo, 1998, no. 4, pp. 38–42 (in Russian).
3. Gridin V. M. Calculating the induction motors equivalent circuit parameters by catalogue data. Elektrichestvo, 2012, no. 5, pp. 40–44 (in Russian).
4. Prishchepov M. A., Prishchepova E. M., Ivanov D. M. Calculation of the parameters of the equivalent circuit of asynchronous motors according to catalogue data and the construction of their main mechanical and electromechanical characteristics. Agropanorama, 2016, no. 5, pp. 20–32 (in Russian).
5. Firago B. I. Calculations for the electric drive of industrial machines and mechanisms. Minsk, Tekhnoperspektiva Publ., 2012. 640 p. (in Russian).
6. Firago B. I. Training manual for course design on the theory of electric drive for students of the specialty 1-53 01 05. Minsk, Belarusian National Technical University, 2005. 125 p. (in Russian).
7. Ivanov-Smolenskii A. V. Electric machinery. Moscow, Energiya Publ., 1980. 927 p. (in Russian).
8. Vol’dek A. I. Electrical machines. 2nd ed. Leningrad, Energiya Publ., 1974. 839 р. (in Russian).
9. Shreiner R. T. Mathematical modeling of AC electric drives with semiconductor frequency converters. Yekaterinburg, Ural Branch of the Russian Academy of Sciences, 2000. 654 p. (in Russian).
10. Syromyatnikov I. A. Operating modes of asynchronous and synchronous motors. 4th ed. Мoscow, Energoatomizdat Publ., 1984. 240 p. (in Russian).
11. Baklin V. S., Gimpel’s A. S. Mathematical model of a frequency-controlled induction motor. Izvestiya Tomskogo politekhnicheskogo universiteta = Bulletin of the Tomsk Polytechnic University, 2005, vol. 308, no. 7, pp. 148–153 (in Russian).
12. Kopylov I. P. Mathematical modeling of electrical machines. 3rd ed. Moscow, Vysshaya shkola Publ., 2001. 328 p. (in Russian).
13. Chilikin M. G., Sokolov M. M., Terekhov V. M., Shinyanskiy A. V. Fundamentals of an automated electric drive. Moscow, Energiya Publ., 1974. 567 p. (in Russian).
14. Dement’ev Yu. N., Chernyshev A. Yu., Chernyshev I. A. Electric motor drive. Tomsk, Tomsk Polytechnic University, 2009. 224 p. (in Russian).
15. Chernyshev A. Yu., Dement’ev Yu. N., Chernyshev I. A. Alternating current electric drive. Tomsk, Tomsk Polytechnic University, 2011. 213 p. (in Russian).
16. Mal’tseva O. P., Udut L. S., Koyain N. V. Control systems for electric drives. Tomsk, Publishing house of the Tomsk Polytechnic University, 2007. 82 p. (in Russian).
17. Prishchepov M. A., Prishchepova E. M., Ivanov D. M. Calculation of the static characteristics of short-circuit induction motors in motor and generator modes with frequency controlled speed and stabilization of the excitation flow. Agropanorama, 2017, no. 2, pp. 26–36 (in Russian).
18. Prishchepov M. A., Prishchepova E. M. Calculation of limiting mechanical and electromechanical characteristics with frequency control of speed in an open system frequency converter-asynchronous engine. Agropanorama, 2021, no. 5, pp. 15–27 (in Russian).
19. Udut L. S., Mal’tseva O. P., Koyain N. V. Design and study of automated electric drives. Part 8. An asynchronous frequency-controlled electric drive. Tomsk, Publishing house of the Tomsk Polytechnic University, 2009. 448 p. (in Russian).
20. Klyuchev V. I. Electric drive theory. Moscow, Energoatomizdat Publ., 1985. 560 p. (in Russian).
21. Chilikin M. G., Klyuchev V. I., Sandler A. S. Theory of an automated electric drive. Moscow, Energiya Publ., 1979. 615 p. (in Russian).
Review
Views:
7432
JATS XML
Email this article 
